Your current location:HomePRODUCTSAsphalt Mix试件制备
Core And Beam Saws CRT-SAW200
Core And Beam Saws CRT-SAW200
Core And Beam Saws CRT-SAW200
- Description：
Core And Beam Saws CRT-SAW200
- Model：
CRT-SAW200
- Manufacturer：
Cooper
Download
Product Information
  • Description
  • Standard
  • Feature
  • Specification
  • Configuration
  • Software
Description

沥青混合料板块切割机

Easy-to-use, fast and accurate sawing systems. 

Cooper Research Technology has developed easy-to-use sawing systems for fast, accurate cutting of beams for asphalt prisms (prepared in CooperResearch Technology’s Roller Compactors – small and large models) to be used for Four Point Bending Beam Testing in CRT-SA4PT-BB and CRT-LH4PTBB, for Two Point Bending Beam testing in CRT-2PT, and cutting & dressing round cores and large & small wheel tracked slabs.


Key Uses

• Cutting of prisms to be used in Four Point Beam Bending testing according to EN123697-24/26 and AASHTO T321

• Cutting of trapezoidal specimens to be used in Two Point Beam Bending testing according to EN12697-24/26

• Cutting and dressing of round cores up to 200mm depending on model

• Cutting and dressing of wheel tracking slabs


Maintenance

Annual Service and Maintenance Contracts are available for this device.

Please enquire for further details. Note: This device should be checked annually.

Standard

• EN 12697-24 / 26

• AASHTO T321

Feature

• Suitable for natural and artifical slabs, asphalt, concrete, tile, marble, granite

• Four point beam testing jigs supplied as standard

• Variable speed and electromotive feed available as an optional extra

• CE marked

Specification
DescriptionTechnical Specification
Diamond disk250-600mm
Depth of cut200mm with 600mm blade fitted as standard
Cutting length750mm
Wheel tracker slabs305x305mm，260x305mm，500x180mm
Cores up to200mm
Speed rpm1400rpm
Electrical supply415 Volts 50Hz 3 Phase or 220VAC 60Hz 3 phase @ 50Amps + Earth
Power5.6kW
Water SupplyCooling water is recirculated from a built-in holding tank (approximately 80L capacity)
Dimensions

Without Safety Enclosure：1320 x 700 x 1800mm (WxDxH) 

With Safety Enclosure： 2100 x 1300 x 2000mm (WxDxH) 

Estimated weight

Without Safety Enclosure：175kg

With Safety Enclosure：290kg

* variable options available upon request

** Requires 9 bar compressed air. Not retrofittable

Configuration

• CRT-SAW-200-M Manual Asphalt and Concrete Universal Heavy Duty Saw. Cutting cores 100,150 and 200 mm diameter, slabs up to 750mm long.Blade 600 mm and cutting jigs to be ordered separately. 415V 50Hz 3ph.

• CRT-SAW-200-M-60 Manual Asphalt and Concrete Universal Heavy Duty Saw. Cutting cores 100,150 and 200 mm diameter, slabs up to 750mm long.Blade 600 mm and cutting jigs to be ordered separately. 220V 60Hz 3ph.

• CRT-SAW-200-A Auto Asphalt and Concrete Universal Heavy Duty Saw. Cutting support with electromotive feed: 30-290 mm/min. Variable bladespeed: 0-2000RPM. Cutting cores: 100,150 and 200 mm diameter, slabs: up to 750mm long. Blade 600 mm and cutting jigs to be ordered separately.415V 50Hz 3ph.

• CRT-SAW-200-A-60 Auto Asphalt and Concrete Universal Heavy Duty Saw. Cutting support with electromotive feed: 30-290 mm/min. Variable bladespeed: 0-2000RPM. Cutting cores: 100,150 and 200 mm diameter, slabs: up to 750mm long. Blade 600 mm and cutting jigs to be ordered separately.220V 60Hz 3ph.

• CRT-SAW-200-A-C Auto Asphalt and Concrete Universal Heavy Duty Saw. Cutting support with electromotive feed: 30-290 mm/min. Variable bladespeed: 0-2000RPM. Cutting cores: 100,150 and 200 mm diameter, slabs: up to 750mm long. Including a safety cage with blade interlock. Blade 600mm and cutting jigs to be ordered separately. 415V 50Hz 3ph.

• CRT-SAW-200-A-C-60 Auto Asphalt and Concrete Universal Heavy Duty Saw. Cutting support with electromotive feed: 30-290 mm/min. Variable bladespeed: 0-2000RPM. Cutting cores: 100,150 and 200 mm diameter, slabs: up to 750mm long. Including a safety cage with blade interlock. Blade 600mm and cutting jigs to be ordered separately. 220V 60Hz 3ph.

Accessories/Spare Parts

Accessories

Accessories are not included in the price of main device (unless stated otherwise) and may be purchased separately if required.

• CRT-SAW-PROT Splash protection for Asphalt and Concrete Universal Heavy Duty Saw

• CRT-SAW200-CJRC Clamp Jig for round cores 100&150mm Asphalt and Concrete Universal Heavy Duty Saw

• CRT-SAW200-SLAB Clamp jig for cutting beams Asphalt and Concrete Universal Heavy Duty Saw

• CRT-SAW200-SCB Clamp jig for SCB specimens & irregular pieces Asphalt and Concrete Universal Heavy Duty Saw

• CRT-SAW-CJ2PT-MAN Clamp jig for cutting 2PT specimens Asphalt and Concrete Universal Heavy Duty Saw

• CRT-SAW-BL600 Blade 600mm Standard

• CRT-SAW-BL600-CON Blade 600mm for concrete cutting

Previous:60-1203 Automatic Cutting Machine 450mmNext:No Data
Popular Product