Optimisation of the wheel tracking test time and result accuracy through computerised control
Wheel tracking is used to assess the resistance to rutting of asphaltic materials under conditions which simulate the effect of traffic. In this machine, two500x180mm specimens are tested simultaneously by tracking with wheels fitted with pneumatic tyres under specified conditions of load, speed andtemperature while the development of the rut profile is monitored at specified intervals during the test. The moulded specimens are inserted andremoved from the wheel tracker using an Easy-load system.
The Wheel Tracker Large Device CRT-WTENLD supersedes the French Pavement Rutting Tester by using a unique instrumented measurement device,linked to the data acquisition, to measure the development of rutting during testing. It allows efficiency compared to any other type of devicesof its type. The test procedure and conditions are controlled and data acquired using Windows™ software running on a host computer via a high speeddigital interface and signal conditioning system.
We have recently innovated Wheel Tracker Large Device and added two new exciting features:
Temperature recording and display This new functionality in the software allows the operator to observe in real time a graph of the temperature asa function of time for each of the 4 probes (air and sample temperature for each side of the machine) from the start of the conditioning period until theend of the main test. Temperature data are also stored in a file for record keeping and analysis. Data are recorded at user-defined intervals, with interval of 30 seconds. 3-colour light system indicating the status of the computer Controlling your time in a very active test labenvironment divided over various tests and test devices is not always easy. We have incorporated a beacon on our Large Wheel Tracker to make lifeeasier for laboratory operators. It clearly indicates the status of the test at a glance across the laboratory.
This beacon is essentially an efficient 3-colorlight system which works as follows:
• Red - Undergoing test cycles
• Amber - Take measurements reading
• Green - Test completed - machine stoppedThis function allows the operator to work more effectively
Key Uses
Determination of the rut resistance of asphaltic paving materials
Software
• User friendly, intuitive and reliable Windows™ software developed using LabVIEW™
• Software is designed to perform EN 12697-22 Large device
• Integrated acquisition system for data capture and machine control
• Software automatically starts the wheel motion and brings the specimens up into contact with the moving wheels
• Rut depth of both specimens is monitored according to the procedure specified in the standard
• Three linear displacement transducers are housed in a frame which slides over the moulds on each side of the machine
• The frame is positioned at five pre-determined measurement points to allow a total of 15 rut readings to be automatically captured by the software
• Readings are automatically stored and on-screen graphs show rut development as well as historical rut data. The acquired rut data is alsosaved to disk
• Software stops the wheel tracker on completion of a test and prints a test report if required
• Temperature recording and display
• The stored test data can be analysed and compared with other test data utilising a spreadsheet package
• Utilities are included for transducer check, diagnostic routines and RTD calibration