9500 Pressure Aging Vessel (PAV)
9500 Pressure Aging Vessel (PAV)
9500 Pressure Aging Vessel (PAV)
9500 Pressure Aging Vessel (PAV)
- Description:
9500 Pressure Aging Vessel (PAV)
- Model:
9500
- Manufacturer:
PRENTEX
Product Information
  • Description
  • Standard
  • Feature
  • Specification
  • Configuration
  • Software
Description

沥青压力老化试验仪

Prentex takes pride in supplying one of the  PAV systems that meets all technological standards requirements. The PAV 9500 can provide you with dependable quality, and the results that your organization demands. Energy efficient and easy to maintain, the PAV 9300 can be shipped complete to your work site for easy set up.Prentex now offers touchscreen control of  popular Pressure Aging Vessel (PAV) and Remote Access. 



The PAV 9500 offers numerous features that ensure quality results every time. Originally designed in the early 90's with the US Highway Department, Prentex continues to capture the design quality,  results and operational ease sought by any laboratory engaged in aging bitumen.


Energy efficient and easy to maintain, the Prentex Pressure Aging Vessel (PAV) 9500 is compact and easy to operate. The PAV 9500 features compliance with AASHTO R-28, ASTM 6521, and EN14769 Laboratory Standards related to aging bitumen. Manufactured in the USA with precision stainless steel, this ASME Code stamped vessel meets all safety requirements needed to ensure efficient and safe operation.


The PAV 9500 operates using almost any standard electrical supply and is  that it actually saves energy.


The PAV 9500 system meets all suggested safety requirements and is easy to maintain, especially with our customer support policies.Meets all AASHTO R28, ASTM6521 and EN14769 apparatus requirements.



PAV 9500 PRODUCT DESCRIPTIONThe Prentex PAV 9500 performs accelerated aging of asphalt binder samples. It will give you results while saving time and aggravation. As an ASME pressure vessel designer, Prentex designed the PAV 9500 with your safety in mind.



Made out of stainless steel, the PAV 9500 is one of the durable systems available. The pressure vessel meets standards accepted worldwide. Space and energy efficient, the PAV 9500 operates from a standard 100 to 125 volt, 10 Amp outlet or from a 208 to 252 volt, 5 Amp outlet. Weighing just under 180 pounds, the PAV 9500 can be stored on any laboratory table top, and even under overhead shelving.

Standard

• AASHTO R28

• ASTM D6521

• EN-14769

• SHRP

• JTGE20 T 0630-2011

Feature

• Requires no special wiring

• Draws less than 525 watts during warm up and less than 60 watts of electricity when at a stable temperature.

• Is available in 100-125 volt, 10 Amp versions and 208-252, 5 Amp versions

• PAV system available that can operate with a standard low cost back up supply during a power outage.

• Safe and Supported

Specification
DescriptionTechnical Specification
工作压力0.00MPa 到 2.10 MPa (304.6psi)
压力传感器分辨率:0.003MPa   精度:0.5% (±0.01 Mpa)   测量范围:0~3.45MPa
工作温度范围

自动模式下试验规范温度: 90℃ /100℃ /110℃和 85.0℃

手动非规范研究模式温度: 60℃~120℃

温度测量 : 铂电阻 RTD 

传感器 : 分辨率 0.1℃ , 精度 ±0.1℃

PID 数字指示温度控制器精度设定点的 ±0.3℃
温度均匀性老化温度设定值 ±0.5℃; 当温度超过超温保护温度150℃时, 自动关闭开关
通过微处理器控制的定时系统所有功能的 0.1%
定时显示

试验时间从增压开始计算预计老化时间; 累计超过温度允许误差范围 ±0.5℃的时间; 累计超过压力允许误差范围 ±0.5℃的时间

空气调节和进气系统

标准配备有调节器,出口设备配备有与工 业压缩空气瓶匹配的转接头。并配备 6 英尺长的快速连接软管香,可以连接到系统箱后面

压力泄压带刻度的弹簧接触器式减压阀,用于在 350psi(2.45MPa)的安装时压力的泄压
排气提供空气消音器,井安装在机器上。提供泄气适配器 ( 需要现场安装 )
空气要求试验时须提供气源,可用实验室提供的压缩空气或者市场上得瓶装压缩空气。压力要求2.2~2.4MPa
电源208-240V AC,50-60HZ,5A


Configuration

• 9500 Pressure Aging Vessel (PAV)

Accessories/Spare Parts