
The Matest-Pavetest AMPT is a servo-hydraulically controlled testing machine specifically designed to perform the three asphalt tests developed underNCHRP Projects 9-19 and 9-29; Dynamic Modulus, Flow Number and Flow Time. It is also the prescribed equipment in AASHTO T378-17Standard Method Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) using the Asphalt Mixture PerformanceTester (AMPT). In addition, the Pavetest AMPT can also perform Direct Tension Cyclic Fatigue, Indirect Tensile Dynamic Modulus, IncrementalRepeated Load Permanent Deformation, Semi-circular bend, and Overlay Testing of Asphalt Mixtures.
The Matest-Pavetest AMPT is underpinned by Pavetest’s CDAS digital controller, TestLab software and a full complement of accessories,hardware and software in unison.

Testing Kits
B204 KIT Overlay kit according to ASTM WK26816. Comprises:
• B204-01 Overlay jig
• B204-02 Pair of Overlay Tester (OT) specimen plates
• B204-03 OT specimen preparation jig according to ASTMWK26816
B204-01 KIT Overlay kit according to TEX-248-F. Comprises:
• B204-01 Overlay jig
• B204-02 Pair of overlay tester (OT) specimen plates
• B204-13 OT specimen preparation jig according to TEX-248-F
B207-01 KIT AMPT Indirect Tensile (IDT) kit. Comprises:
• B207-01 AMPT IDT Jig
• B253-01 LVDT mounting Jig
• B253-03 Gauge point template (150 mm specimen)
• B290-04 AMPT Miniature LVDT (1 mm) (4 pieces)
• B253-53 Gauge point (32 pieces)
• B207-02 Cable gland (4 pieces)
B254-02 KIT AASHTO TP124 | ASTM D8044 SCB testing kit. Comprises:
• B208 SCB frame
• B254-10 Roller support
• B254-02 Springs and roller

Small Specimens Accessories | AMPT
For dynamic modulus on 38 mm (diameter) x 110 mm (h) specimen:
• B200-05 Bottom loading platen for 38 x 110 mm (Ø x h) specimen
• B200-06 Top loading platen for 38 x 110 mm (Ø x h) specimen
• B202 Gauge Point Fixing Jig
• B202-02 Spacer for 110 mm specimen height to be used withgauge point fixing jig B202
• B202-03 38 mm and 50 mm diameter specimen - extension forgauge point fixing jig plungers B202
• B253-53 Gauge point (32 pieces)
• B201-52 5 Minute, two part epoxy 24 ml
• S311 Sealing ring Ø 38 mm (10 pcs)
• S310 Rubber membrane Ø 38 mm (10 pcs)
• B270-20 Membrane stretcher for asphalt specimen Ø 38 mm
For S-VECD test on 38 mm (diameter) x 110 mm (h) specimen:
• B200-11 38MM AMPT tension platen (2 pieces needed)
• B202 Gauge Point Fixing Jig
• B202-02 Spacer for 110 mm specimen height to be used withgauge point fixing jig B202
• B202-03 38 mm and 50 mm diameter specimen - extension forgauge point fixing jig plungers B202
For dynamic modulus on 50 mm (diameter) x 135 mm (h) specimen:
• B200-07 Bottom loading platen for 50 x 135 mm (Ø x h) specimen
• B200-08 Top loading platen for 50 x 135 mm (Ø x h) specimen
• B202 Gauge Point Fixing Jig
• B202-01 Spacer for 135 mm specimen height to be used withgauge point fixing jig B202
• B202-03 38 mm and 50 mm diameter specimen - extension forgauge point fixing jig plungers B202
• B253-53 Gauge point (32 pieces)
• B201-52 5 Minute, two part epoxy 24 ml
• S311-01 Sealing ring Ø 50 mm (10 pcs)
• S310-01 Rubber membrane Ø 50 mm (10 pcs)
• B270-21 Membrane stretcher for asphalt specimen Ø 50 mm
For S-VECD test on 50 mm (diameter) x 135 mm (h) specimen:
• B200-12 50MM AMPT tension platen (2 pieces needed)
• B202 Gauge Point Fixing Jig
• B202-01 Spacer for 135 mm specimen height to be used withgauge point fixing jig B202
• B202-03 38 mm and 50 mm diameter specimen - extension forgauge point fixing jig plungers B202
