
Designed to grind and polish concrete cube and cylinder specimens, blocks, natural stones, rocks, ceramic materials etc.
Specimens are easily fixed to the table by proper locking stirrups (see accessories) allowing to grind at a time:
- n° 3 cube specimens 100 mm side, or
- n° 3 cube specimens 150 mm side, or
- n° 2cube specimens 200 mm side, or
- n° 2 cylinder specimens Ø 100x200, 110x220, 150x300,160x320 mm, or
- n° 1 block dimensions 390x250 mm
The radial mouvement of the head is equipped with end of stroke system, granting the fully automatic displacament in both directions. The column is completely protected against the abrasive dust.
The vertical lowering of the grinding head is achieved with infinitesimal adjustments by operating on the top hand wheel having 0.05 mm graduations.
The machine, made from rugged plate, is supplied complete with control panel, coolant/decantation tank (by water and emulsifying oil),motor pump, set of abrasive sectors, safety chip guard that when removed, stops automatically the machine.
The standard supply does not include the locking stirrups and the diamond sectors (8 pieces) that ordered separately.
Needed Accessories
C300-06N:Locking Stirrups for cube specimens side 100, 150,200 mm complete with distance piece 85 mm high.
As An Alternative
C299-10:Fast Locking Device, for: cubes 150 and 200 mm; cylinders Ø 100 to 160 mm Each device accepts only one specimen.
It is possible to grind at a time: 1 cube 200 mm; 2 cubes 150 mm; 2 cylinders.
C300-02:Diamond Grinding Sector (8 pieces required) particularly recommended because of their long duration and good grinding action.