MATEST The frame has been designed to perform different kind of tests, from the simple third/centre point flexural test on beams to the advanced FRC displacement controlled tests and energy absorption tests on sprayed concrete. Accurate results are granted by the high stiffness of the frame according to the international Standards requirement (more than 200 kN/mm) and by a high precision load cell measurement system fitted into the frame. The high horizontal daylight of the testing chamber allows to test big dimension specimens. Rollers are optional and ordered separately according to user needs.
C095N-11 Flexural Tests On Concrete Beams
Standards: EN 12390-5 | ASTM C78, C293
Upper and lower roller group forthird point and centre tests onconcrete beams up to200x200x800 mmRollers size:30 mm Ø by 312 mm long,cadmium plated againstcorrosion.
C095N-19 Flexural Tests On Concrete Beams
Standards: EN 12390-5
Two upper loading rollers for third point and centre tests onconcrete beams up to 200x200x800 mmRollers size: 40 mm Ø by 312 mm long, cadmium plated againstcorrosion, to be used with the rollers assembly C095N-12.
C095N-12 Flexural Tests On Paving Slabs
Standards: EN 1339
One upper centre loading roller andtwo lower roller assembly for testson paving slabs.Rollers size:40 mm Ø by 620 mm long,cadmium plated againstcorrosion.
C095N-13 Upper Tamper For Testing Kerbs
Standards: EN 1340
The Tamper, steel made, is mounted on a rotating coupling and fixedto the upper part of the machine to apply a flexural load on the kerb,without any torsional stress.To be used with the rollers assembly C095N-12.
C095N-14 Compression Tests Up To 320kn Capacity
The multipurpose (flexural) frame can be equipped with Lower platen and Upper spherically seated platen, having Ø 165 mm by 30 mm thick, to perform compression tests on low strength and small size specimens. To be used with the four distance pieces C095N-18.The device can be used also for compression tests on mortar specimens.
C095N-17 Flexural Toughness Of Fibre Reinforced concrete (Fcr) Slabs
Standard: ASTM C1550
Base Support Frame,holding the concrete slabs having 800 mmdiameter by 75 mm thick, complete with upper loading element.
C090-14SP Energy Absorption Test On Sprayed concrete Slabs
Standard: EN 14488-5
Square Base Support Frame,holding the sprayed concrete slab with useful inside dimensions 500x500 mm, complete with spheri cally upper loading element.
C090-15 Deflection Measurement Device
Standard: EN 14488-3 | ASTM C1609, C1018
This device is fixed directly on the fiber reinforced concrete beam under test.
The device is placed between the loading bearers of a flexure frame or of a flexure device in a compression frame.
The test is performed by applying a flexural load to the concrete beam with load and displacement control and with automatic deflection meas urement of the loaded specimen.
It is possible to test fibre reinforced concrete beams 100x100x400 or 500 mm and 150x150x500 or 600 mm dimensions.
The deflection device is steel made with chromed finishing; it is supplied complete with transducer holders, vertically positioned on the two opposite sides of the beam, but without the two transducers, for the measurement of deflection (mod. S336-11), and without the fork form transducer (mod. C090-16) to be ordered separately.
C090-16 Fork Form Transducer
Standard: EN 11039-2, EN 14651
For the measurement of the Crack Mouth Opening Displacement (CMOD) and the Crack Base, Medium and Tip Opening Displace ment (CTOD). Measuring range: 5 mm Complete with cable and connector.