EN Standard - High Stability Compression Machines
EN Standard - High Stability Compression Machines
EN Standard - High Stability Compression Machines
EN Standard - High Stability Compression Machines
EN Standard - High Stability Compression Machines
EN Standard - High Stability Compression Machines
EN Standard - High Stability Compression Machines
EN Standard - High Stability Compression Machines
- Description:
EN Standard - High Stability Compression Machines
- Model:
2000 kN/3000 kN/4000 kN
- Manufacturer:
Italy Matest
Product Information
  • Description
  • Standard
  • Feature
  • Specification
  • Configuration
Description

EN标准混凝土压力试验机

The compression testing machines tested for high stability meet the stringent requirements of the: EN 12390-4 | BS 1881:115 | DIN 51220 | UNI 6686, part 3 | NF P18-411 | UNE 83304 | ASTM C39 | AASHTO T22


These four columns prestressed frames are manufactured with specific quality features (processing, tolerances), piston/cylinder group, spherical seat, compression platens, distance pieces etc., conforming and meeting the high stability verification (force distribution).


The conformity of the stability is certified with the verification of the self-alignment (foot-meter test) of the machines components and the restraint on movement of the upper spherical seat/platen, by using a special electric strain load column at 5 measuring points which is connected to its suitable datalogger.


The important feature of the high stability frames is their uniform distribution of the applied load on all the specimen surface under test. The sample breakage is satisfactory and the strength results are correct, high and true. 

EN标准混凝土压力试验机

EN标准混凝土压力试验机

EN标准混凝土压力试验机

Compression Testing Machine 2000 Kn Capacity Tested For High Stability

Test cubes with a side length of 200mm and cylinders with a side length of 160x320mm using a measuring instrument with a specific resistance scale, suitable for cubes with a side length of 150mm and 160mm cylinders

The size of the test block can reach 500X300mm, the side size of the cube is 200mm, and the cylinder size is 160X320mm

• vertical daylight: 334.5 mm

• Horizontal daylight between columns: 260 mm

• Compression platens Ø 287X60 mm

• Calibration accuracy: Class 1

• ram travel 60 mm approx

• High stiffness and heavy weight 4 columns frame

EN标准混凝土压力试验机

EN标准混凝土压力试验机

EN标准混凝土压力试验机

EN标准混凝土压力试验机

Compression Testing Machine 3000 Kn Capacity Tested For High Stability

Test cubes with a side length of 200mm and cylinders with a length of 160x320mm

Another model of 3000 kN EN standard concrete pressure testing machine block pressure plate, with a test block size of 500X300 mm, a cube side size of 200 mm, and a cylinder size of 160X320mm.

• vertical daylight: 334.5 mm

• Horizontal daylight between columns: 272 mm

• Compression platens Ø 287X60 mm

• Calibration accuracy: Class 1

• ram travel 60 mm approx.

• High stiffness and heavy weight 4 columns frame

EN标准混凝土压力试验机

Compression Testing Machine 4000 Kn Capacity 

To Test Cubes Up To 200 mm Side And Cylinders Up To Ø 250x500 mm

• vertical daylight: 530 mm

• Horizontal daylight between columns: 340 mm

• Compression platens Ø 287x60 mm

• Calibration accuracy: Class 1

• ram travel 60 mm approx

• High stiffness and heavy weight 4 columns frame

EN标准混凝土压力试验机

Compression Testing Machines 3000 Kn And 5000 Kn Capacity Tested For High Stability

This Oversized Isostatic High Stability Stiffness Frame For Central And Research Laboratories To Test High Strength specimens, Explosive Samples, Rock And Ceramic

• Compression platens Ø 316x60 mm

• Hydraulic pressure: 360 bar

• vertical daylight: 411 mm

• Horizontal daylight between columns: 321~345 mm

• ram travel: 100 mm

• High stiffness and heavy weight 4 columns frame:0.3 mm load

• Safety guards to CE Directive Class “1”

• Frame size 3000 kN: 725x710x1570 mm

• Frame size 5000 kN: 750x750x1700 mm

• Power supply: 230V 1ph 50Hz 750W

• Weight frame 3000 kN: 2500 kg / 5000 kN: 4000 kg

Standard

• EN 12390-4

• BS 1881:115

• DIN 51220

• UNI 6686

• NF P18-411

• UNE 83304

• ASTM C39

• AASHTO T22

Feature

• The four columns frame is prestressed on 8 ring nuts and the clamping is obtained and checked by a dynamometric spanner, allowing to get a very high stiffness and stability on all load range and to keep these features in the time

• The spherical seat, in oil bath with null end float, is studied and manufactured to grant, during the starting phase of the test, elf-alignment without frictions of the upper compression platen to the specimen. By applying the load, the ball seating assembly locks and keeps the position until the specimen’s failure

• Piston and cylinder are coupled with high quality packing set

• Compression platens are hardened over 55 HRC and rectified

Specification
Description2000 kN Technical Specification
Dimensions690 x 400 x 1400 mm approx
Weight850~920 kg
Power supply230V 1ph 50Hz 750W


Configuration

Accessories For 2000 Kn Machines From Mod. C089 To C089-04n

C111-32:DISTANCE PIECE, 20 mm high for cylinders Ø 150x300 mm

C111-12:DISTANCE PIECE, 73+50 mm high for cubes 200 mm side

C111-13:DISTANCE PIECES, 73+50+50 mm high for cubes 200and 150 mm side

C111-14:DISTANCE PIECES, 73+50+50+50 mm high for cubes200, 150 and 100 mm side

C111-15:DISTANCE PIECES, 50+50 mm high for cylindersØ 110x220 mm

C111-24:DISTANCE PIECE 50 mm high 

C111-25:DISTANCE PIECE 73 mm high

C110-15:LOWER COMPRESSION PLATEN, Ø 216x40 mm, hardened and rectified to test cubes 100 and 150 mm, as analternative to the standard platen Ø 278 mm

C127N:GRAPHIC PRINTER on thermo-paper on board for digitalmodels

C127-11:THERMO-PAPER roll for printer (pack of 10 rolls)

C121-06:SAFETY GUARDS, polycarbonate, with hinges and lock,to CE Directive

C121-51:STOP SWITCH on safety guard

C107-10:CAPPING RETAINERS (set of two) for cylinders Ø 150 mmand 6”

C107-20:NEOPRENE PADS (set of two) for cylinders Ø 150 mm60 shore A

C110-30:UPPER COMPRESSION PLATEN+SPHERICAL SEAT, to fixon the testing machine, in replacement of the standardplaten + seat to obtain an increased vertical clearance ofthe testing chamber

C115-01:TWO WAY HYDRAULIC VALVE, connected to the motorized pumping unit of the machine to activate a secondframe

C097-01:DUAL LOW CAPACITY DIGITAL RANGE, complete withappropriate pressure transducer, only for digitalmachines

C097-05:CALIBRATION CLASS 1, starting from 1% of the fullrange

C097-08:OFFICIAL ACCREDIA (Equivalent UKAS, ENAC, DAKKS,SAS, COFRAC etc.) HARDNESS CERTIFICATE of upperand lower compression platens

C107-01:AUTO-CENTERING DEVICE for cubes 100 and 150 mmside, and cylinders Ø 100 and 150 mm

C100:SPLITTING TENSILE test device for cylinders

C106:FLEXURAL TEST DEVICE for concrete beams

E170:COMPRESSION DEVICE to test cement specimens40.1x40 mm

C104-10N:SERVO-STRAINServocontrolled Software, system of

C125N:ELASTIC MODULUS determination of the secant compression on concrete. Automatic system with pace ratecontrol also when releasing the load

C126:BENCH to hold the compression machine

C104-04:CONSOLE HOUSING THE SERVO-PLUS EVOLUTIONThe pump assembly lined with sound proofing materialfor noise reduction and the digital system are encased toenhance the design and look of the machine