Vicatronic – Automatic Vicat Apparatus for Cement
Vicatronic – Automatic Vicat Apparatus for Cement
Vicatronic – Automatic Vicat Apparatus for Cement
- Description：
Vicatronic – Automatic Vicat Apparatus for Cement
- Model：
E044A
- Manufacturer：
Italy Matest
Download
Product Information
  • Description
  • Standard
  • Feature
  • Specification
  • Configuration
Description

全自动触屏维卡仪

The new Vicatronic apparatus is designed and manufactured using the recent and sophisticated technology to grant precise measurements of the setting time of cements, mortars, gypsum and other pastes.

The unit is manufactured with anticorrosion components perfect to work in environment with humidity and temperature requested by the relevant standards.

Vicatronic – Automatic Vicat Apparatus for Cement

Probes

The mobile probe weighs 300 g (1000 g following the EN, NF Standards), the penetration needle has a 1.13 mm diameter (1 mm following ASTM Standard), and its fall can be programmed in free fall or in guided fall. Totally flexible as far as the time is concerned, the penetration time can be selected between 0.25 minutes and 900 minutes, the interval between two penetrations can be fixed or can change during the test based on the penetration depth or on the number of penetrations. The options described above can be combined together. The penetration measure is read by a accurate encoder having a resolution of 0.1 mm

The Vicatronic also calculates, visualises and prints：

• Date and time of the test

• Time of each penetration

• Depth of each penetration


E044-11M SOFTWARE VICATPRO that allows by the Ethernet port downloading and managing all the data directly fromthe PC. E044-12M needed for each Vicat to be connected to the software.

E044-12M Enabling of one Vicat for remote control through Vicat-Pro (E044-11M).

S334-11 Network connection RJ45 cable to connect one Vicat.

S334-12 Switch to connect from 2 to 7 Vicat to the ethernet network.

Vicatronic – Automatic Vicat Apparatus for Cement

Timer 0~900 Minutes

The firmware allows activating a delay on the appliance to the beginning of the test. This program is particularly useful when the approximate setting time of the mortar is known and the operator wants to start the working of the Vicatronic after a certain time in order to concentrate the penetrations with a short interval of time between them and have better measuring values.


Test Results

The Vicatronic is equipped with two USB ports to allow the saving of the results on a USB stick. It is also possible to print data with the on-board printer.

Standard

• EN 13279-2 

• EN 480-2

• ASTM C187

• ASTM C191

• AASHTO T131

• EN 196-3

Feature

• Realtime graphic display of the test

• Fully automatic execution of the tests

• Pre-set penetration cycles according to the standards

• Customizable programs for research tests

• Easy data transfer simply using a USB stick

• Free fall or guided fall option

Specification
Description
Technical Specification
Touch displayLCD, TFT, 800 x 480 pixels, 7 inches, graphic touchscreen
Port2 USB ports, 1 Ethernet port
Built-in encoderInternal encoder with 0.1mm resolution
Between penetrations time15 seconds
Dimensions200 x 335 x 440 mm
Weight13kg approx
Power supply

230V 1ph 50-60Hz 50W


Configuration

Accessories For E044A

• E044-07 Thermostatic Controlled Heating/Cooling System

The water thermostatic unit produces water at constant temperature of 20 °C ± 0.5 °C. The water is forced into the tank E043 (to be ordered separately) and then back to the bath allowing to perform the test at controlled temperature and humidity as requested by EN196-3 Standard. The system is supplied without taps and tubing (see E044-08) and accepts ONE or TWO Vicatronic.

• E043：Mould Tank to test the specimen immersed in water. To be used in conjunction with E044-07 and E044-08 for compliancy to EN 196-3, or at a room temperature of 20 °C


Gypsum Test

Standard: EN 13279-2

• E044-40N：Conical Penetration Needle,having 8 mm of diameter and 50 mm long,to make gypsum tests following EN Specification.

• E044-41N：Probe 100g, to make test on gypsum following EN Specification.

• E044-30：Needle Cleaning Device It removes the residual cement particles from the needle keeping it constantly clean.


Needed Accessory For E044-07

E044-08 Kit of Taps And Tubing It consists of taps and tubing for the connection of the water thermostatic unit E044-07 to the water tank E043 (to be ordered separately). The kit is suitable for the connection of ONE Vicatronic. The kit is supplied calibrated for water inlet/outlet.


Accessories For E044A

• E042-02N：Consistency Plunger Ø 10x50 mm (EN 196-3, ASTM C187)

• E042N：Needle for final setting Ø 1.13 mm (EN 196-3, EN 480-2)

• E042-01N：Needle for final setting ASTM 1 mm diameter (ASTM C187, C191)

• E044-45：Additional 700 g Weight (EN, NF) (EN 480-2, ASTM C187)

• E055-04：Plastic mould Ø 80/90x40 mm high following UNI

• E055-11：Brass mould Ø 80/90x40 mm high following BS

• E055-13：Plastic mould Ø 65/75x40 mm high following DIN


Spare

• E046N：Ø 1.13 mm hardened needle (EN 196-3)

• E046-01N：Ø 1 mm hardened needle (ASTM C191)

• E055-05：Plastic mould Ø 60/70 x 40 mm high (ASTM C187, C191)

• E055-07：Glass base plate

• E055-10：Plastic mould Ø 70/80 x 40 mm high (EN 196, EN 480-2)

• E042-06N：Probe 300g (EN 196-3, ASTM C187, C191)

• E044-48N：Tang to fix the needle to the probe

• C127-11：Thermo-paper roll for printer (pack of 10 rolls)

Previous:E190M Elastic modulus on cement (automatic）Next:No Data
Popular Product